Set came pretty quickly. Had to wait a few weeks to set it up. Then lo and behold a portion of one of the two compounds was like rubber. I was able to only get one ear plug out of it and when I called and left a message I never got a call back. Pretty disappointing.

Easy to use and fast shipping.

I give it 3 stars only because it was easy to mix and form. But...once cured they did not fit the same as during the curing stage. Maybe I did not do something quite right, either way these plugs will jot work for me now. So I have to start over again.

I have to admit that these earplugs just didn't work very well for me. I followed the instructions and allowed them to cure. They fit in my ears, but wouldn't stay in place when I put my motorcycle helmet on. The fit wasn't snug enough. A pity. I was looking forward to something more comfortable than the foam earplugs.

These DIY Ear Plugs are a truly a life changing product! The instructions are easy to follow and the moulding process is straight forward. Pay particular attention to clearing the ear canal of any wax, debris or small insects otherwise you’ll have one or all these entombed in your choice of silicon colour. The DIY Ear Plugs are great for reducing the sound effects of shooting. Additional benefits include hearing protection from barking dogs, noisy kids and nagging wives. You’ll find the latter a marriage saving and thrifty advantage that will save your thousands in counselling fees. Word of caution, steer clear of orange or yellow silicon otherwise you’ll find well-meaning strangers attempting to pluck chucks of ‘wax’ from your ears. I give this product the Fennec Fox five star tick of approval and recommendation ;)

Easy to make work great and much cheaper than what you can buy elsewhere.

What can I say, these DIY ear plugs are great. If you follow the instructions you can't go wrong. I will definitely be getting these again.

I had a set of custom made earplugs that I lost. Needed another set fast. Bought the EAR do it yourself kit and made up my own. Went to the range a few days later and they worked just as well as the older $50 set. This kit makes good ear protection. I ordered one in Tan. The tan mixer had started to set up and I had to extract the skinned over part from the mix, but the rest worked OK

easy to use, good directions, worked out very well

They worked really well. I am very happy with their performance.

Have tried every other ear plug I could find. Nothing worked good in my left ear. These work great. Comfortable, blocked noise well. Easy to mold, just don't take too long once the 2 parts are mixed.

Easy to make. Work very well. Great for motorcycling. Fit under helmet no problems. Quick and easy to insert. I recommend this product to all I meet.

I think this is a pretty good product; but, i wan't happy with the fit on my second ear, pulled it out to redo, but by then it was a bit too late and i did not get a good fit by re-inserting it. My fault totally; once you get the putty mixed you must get it finished pretty quick! Really easy instructions, easy to do, i just stretched the time a bit too much. Will try out the good one next time i ride my Harley and if i get the results i think that i will, I'll likely order another kit.

It worked excellent had no problems and it was easy to do

The plugs were easy to make and had a decent fit. My only suggestion would be to split the epoxy into the right portions per ear at the factory. I split the material into equal parts but didn't do it right - as one ear plug is larger and heavier than the other.

very disappointing. perfect mold but does not stay tight enough in ear to block much noise. waste of money.

I work offshore on a drilling rig and hate the foam ear plugs that they buy. They start to irritate my ears after a few minutes. I bought my DIY kit while I was at work my last hitch and made them as soon as I got home. They are very simple to make!!! I brought them to work with me a week ago and have been wearing them everyday for a week so far. They are very comfortable, easy to clean, and are great sound blockers. I recommend them to everyone, why spend $120 bucks for custom ones.

These by far are the best ear plugs for surfing. I've been surfing for 30+ years, traveled all over the world and swear these have help prevent "surfers ear". I recommend them for any water sport!

Very disappointed overall. The earplugs are bulky and don't block sound that well. Save your money.

Très bon produit. facile d'utilisation simple et efficace.' [Translation: Very good product. easy to use simple and effective.]

Less comfortable than foam earplugs.

Ok first of all. The prices for these earplugs is just right. The easy to do instructions and it doesn't take long to make them. I work on drilling rigs and I have seen companies pay over $100.00 for a pair of these. I ordered me and my wife some enjoying them very much. Thanks for this product. Jerald w Pitre Jr Jennings, Louisiana.

I bought these for use while shooting. They were easy to make and looked good, BUT......they don't block much sound. Actually they are a total waste of money.

I followed the directions but I kneaded the material too long and it was too hard to mold to my ear. Luckily out of the remainder I had plenty to make 2 plugs! They seem to muffle sound pretty good as I had to raise the volume on my helmet intercom quite a bit.

I use these puppies for sleep. They don't block sound out as well as typical foam ear plugs do, but they're much more comfortable: I never have to worry about waking up in the middle of the night with a hurting ear. The smooth texture took some getting used to. They were pretty easy to put together. I'm satisfied overall.

The process was easy to do and fast and seem as if they would do the trick fitting the ear so well....These plugs didnt really do what I was thinking. They fell out in the water while my son was using them. So if you are looking for something to blosk water from getting in def would say works little to not at all for that as far as keeping noise out they do a pretty good job at that.

I got this kit to make custom ear plugs for my 3 year old son who recently had tubes put in his ears. The process was easy to make, and they fit perfectly. The problem I have is that they are so hard that they do seem to pop out unexpectedly. Plus, after a shower, the ear still feels wet. I love the concept, but not the carry through.

I have had these previously. This ythe first time I made them myself. They work great.

This seems like a great idea in theory - ear plugs molded to one's individual ears - and I was willing to pay an price way above any other kind of ear plug, hoping they would be much more effective than ordinary ones. The molding process worked fine and they came out perfect - but I find them *less* effective in blocking sound than ordinary foam or soft silicone plugs. I think the material is too firm when set, and therefore it seems impossible to fit them fully into the ear - and without being able to do that, they're not very effective at all.

I bought 2 pairs of the DIY ear plugs and they were mainly for motorcycle riding. I made the first pair and they sealed nice, that is, until I tried to put on my helmet. In no way could I put on my helmet without loosening the ear plugs. So, I made another set of ear plugs with only one-half the amount of molding, so as to make them much smaller. Still, the helmet would knock them loose by just installing it. So, these do not work for me at all. They were easy to make and seem like they'd last a while, but they can not keep a strong seal while installing a good-fitting helmet.

Used them to create custom earbuds for racing. This was a second attempt with this product. The first set did not adhere to the earbud units I had. So, I had to order a second set. The first were also the "natural" color and dried VERY grainy on the outside and resembled a pencil eraser. The second was "florescent" red and dried MUCH smoother. I also have a set of FUZE brand custom - DIY - earbuds that included the buds and two part silicone plug material which made an EXCELLENT pair of custom earbuds on the first try. They are SO good I won't use them for racing...THAT is why I decided to try the cheaper E.A.R. brand.I would, however, recommend the E.A.R. brand for an economic alternative. And if you want JUST earplugs..without speakers..this IS your answer. I am ordering another (3rd) set to have on hand.

I used this product to mold custom fit ear phones around my existing earbuds. Easy to use, and now it blocks out all external sound and increases bass response. They are very durable too.